邊梁數控沖床的伺服送料結構采用五加四傳動機構,送料尺寸**,啟停動作迅速,確保送料質量和技術要求。

濰坊奧騰冷彎機械有限公司制造的邊梁冷彎生產線在全國立體泊車領域,同泊車行業國內*--濰坊大洋、深圳偉創、巨人控股、鑫華源、杭州西子等形成了良好的合作關系;并且通過努力,截止目前合作的客戶達近百家。高質量的產品配以完善的售后服務,讓我們的設備獲得了市場越來越多的認可!
The side beam cold bending production line produced by Weifang oten Cold Bending Machinery Co., Ltd. has formed a good cooperative relationship with the famous brands in the country, such as Weifang ocean, Shenzhen Wei Chuang, giant holding, Beijing Xin Hua source, Hangzhou West son and so on. The volume of products with perfect after-sales service, so that our equipment has gained more and more recognition in the market.

邊梁冷彎成型機主要參數:
(1)20道主輥, 1套校直裝置,1組導向裝置;
(2)過料寬度:500 mm;
(3)軋制厚度:3~4mm(可定制);
(4)軋制速度:0~4米/min可調;
(5)主軸直徑ф100mm;
(6)驅動電機功率:18.5KWx2
(7)機組組成:由:機身、牌坊組件、導向裝置、校直裝置、傳動系統組成。
Main parameters of side beam cold forming machine:
(1) 20 main rollers, 1 set of straightening devices and 1 set of guiding devices;
(2) the maximum overloading width of 1: 500 mm;
(3) the rolling thickness is 3mm and 4mm(customizable);
(4) the rolling speed can be adjusted from 0 to 4 m / min;
(5) Spindle diameter of 100 mm;
(6) Drive motor power: 18.5KWx2
(7) Unit composition: by: fuselage, archway assembly, guide device, straightening device, transmission system.

邊梁冷彎成型機機身及牌坊組件:
邊梁冷彎成型機機身部分是本軋機的主體,其余組成部分均裝在本機身上,為鋼板焊接結構,焊接完成后均去應力處理。各連接面、安裝面精加工且安裝面加工有定位鍵槽,定位**,安裝方便,保證各組軋機主軸之間的平行度及與軋制中心線的垂直度。
牌坊組件是本機的主要工作部分,共有20架,自前至后依次安裝固定在機身上。本組件主要由前后牌坊架、上下主軸、上橫梁、上軸升降調節絲桿、前后軸承支座及主軸軸承等組成。后牌坊架固定在機身上,是上下主軸的支持基準;前牌坊可拆卸,方便更換裝配軋輥。上下主軸通過軸承安裝在軸承支座上,軸承支座可沿牌坊窗口的導向面通過調節絲桿帶動調節上下軸間的距離以適用不同直徑軋輥的安裝。
Side beam cold forming machine fuselage and archway assembly:
The fuselage part of the side beam cold forming machine is the main part of the rolling mill, and the other parts are all mounted on the machine, which is the welded structure of the steel plate, and the stress is removed after welding. Each connecting surface, installation surface is finely machined and the installation surface is machined with positioning keyway, which is accurate in location, convenient in installation, and ensures the parallelism between the main shaft of each group of rolling mill and the perpendicularity with the center line of the rolling mill.
Archway assembly is the main part of the machine, a total of 20, from the front to the back of the installation on the fuselage. This assembly mainly consists of front and rear archways, upper and lower spindle, upper cross beam, upper shaft lifting adjusting wire rod, front and rear bearing support and main shaft bearing, etc. The rear arch frame is fixed on the fuselage and is the support benchmark for the upper and lower spindle. The front arch can be disassembled to facilitate the replacement of assembly rolls. The upper and lower spindle is mounted on the bearing support through the bearing. The bearing support can adjust the distance between the upper and lower shafts by adjusting the wire rod along the guide surface of the archway window to suit the installation of the roller with different diameters.
-/gjeijh/-
http://www.dcago.com