對于邊梁冷彎成型機組來說,機組的結構必須要強有力,因為型材較厚,連續滾壓成型時,原材料重是一方面,另一方面是設備擠壓受力較大,會對機組造成沖擊,所以制造設備不可似是而非,不可為了節省成本而偷工減料,這樣只能是害人害己!濰坊奧騰冷彎機械有限公司制造的邊梁成型機自2009年始投入使用,多年來可靠的質量已經獲得了市場的檢驗,歡迎有需求的顧客前來咨詢考察。
For the edge beam cold bending forming unit , the structure of the unit must be strong because the raw material weight is on the one hand when the profile is thick and the continuous rolling is formed , and on the other hand , the equipment extrusion force is relatively large , so that the manufacturing equipment is not perfect , and the edge beam forming machine manufactured by WeiFang Aoteng Cold Bending Machine Co . , Ltd . has been put into use since 2009 , and the reliable quality has obtained the inspection of the market for many years .

立體車庫邊梁全自動冷彎成型機主機傳動部分采用主電機和分部傳動的方式,每一道軋輥都有單獨的分配箱傳動,確保設備使用壽命和精度。

邊梁冷彎成型機主要參數:
(1)20道主輥, 1套校直裝置,1組導向裝置;
(2)過料寬度:500 mm;
(3)軋制厚度:3~4mm(可定制);
(4)軋制速度:0~4米/min可調;
(5)主軸直徑ф100mm;
(6)驅動電機功率:18.5KWx2
(7)機組組成:由:機身、牌坊組件、導向裝置、校直裝置、傳動系統組成。
Main parameters of side beam cold forming machine:
(1) 20 main rollers, 1 set of straightening devices and 1 set of guiding devices;
(2) the maximum overloading width of 1: 500 mm;
(3) the rolling thickness is 3mm and 4mm(customizable);
(4) the rolling speed can be adjusted from 0 to 4 m / min;
(5) Spindle diameter of 100 mm;
(6) Drive motor power: 18.5KWx2
(7) Unit composition: by: fuselage, archway assembly, guide device, straightening device, transmission system.

整套設備的外觀采用全新的生產工藝,采用下白上籃的顏色搭配,視覺效果*加美好且便于維護保養
-/gjeijh/-
http://www.dcago.com