邊梁冷彎成型機機身及牌坊組件:
邊梁冷彎成型機機身部分是本軋機的主體,其余組成部分均裝在本機身上,為鋼板焊接結構,焊接完成后均去應力處理。各連接面、安裝面精加工且安裝面加工有定位鍵槽,定位,安裝方便,保證各組軋機主軸之間的平行度及與軋制中心線的垂直度。
牌坊組件是本機的主要工作部分,共有20架,自前至后依次安裝固定在機身上。本組件主要由前后牌坊架、上下主軸、上橫梁、上軸升降調節絲桿、前后軸承支座及主軸軸承等組成。后牌坊架固定在機身上,是上下主軸的支持基準;前牌坊可拆卸,方便更換裝配軋輥。上下主軸通過軸承安裝在軸承支座上,軸承支座可沿牌坊窗口的導向面通過調節絲桿帶動調節上下軸間的距離以適用不同直徑軋輥的安裝。
Side beam cold forming chine fuselage and archway assembly:
The fuselage part of the side beam cold forming chine is the in part of the rolling mill, and the other parts are all mounted on the chine, which is the welded structure of the steel plate, and the stress is removed after welding. Each connecting suce, installation suce is finely chined and the installation suce is chined with positioning keyway, which is accurate in location, convenient in installation, and ensures the paralleli between the in shaft of each group of rolling mill and the perpendicularity with the center line of the rolling mill.
Archway assembly is the in part of the chine, a total of 20, from the front to the back of the installation on the fuselage. This assembly inly consists of front and rear archways, upper and lower spindle, upper cross beam, upper shaft lifting adjusting wire rod, front and rear bearing support and in shaft bearing, etc. The rear arch frame is fixed on the fuselage and is the support benchrk for the upper and lower spindle. The front arch can be disassembled to facilitate the replacement of assembly rolls. The upper and lower spindle is mounted on the bearing support through the bearing. The bearing support can adjust the distance between the upper and lower shafts by adjusting the wire rod along the guide suce of the archway window to suit the installation of the roller with different diameters.

立體車庫邊梁生產線-邊梁冷彎成型機組-/濰坊奧騰冷彎機械有限公司/-立體車庫邊梁加工生產設備-車庫邊梁加工設備
http://www.dcago.com